Use Wireless Manager to configure your Telenor EDGE Card settings such as network connections, telephony settings, phonebook, and SMS messaging.

Starting Wireless Manager
There are several methods that you can use to start Wireless Manager.

To start Wireless Manager

1	From the Windows desktop, select Start --> Programs --> Sony Ericsson --> Wireless Manager.
	Or
	From the Windows desktop, double-click the Wireless Manager shortcut .
	Or
	From the Windows system tray, double-click the Wireless Manager status icon . The Wireless Manager status icon is displayed in the system tray only when Wireless Manager is active.

Note:
To successfully run the Wireless Manager application, a Telenor Data SIM must be inserted in your Telenor EDGE Card.

2

If requested, enter your Telenor Data SIM PIN ('0000') and Phone Lock code, and then click OK. You are allowed three attempts to enter the correct PIN and lock code. If you fail to enter the Telenor Data SIM PIN correctly, you are blocked from accessing the Telenor Data SIM. If you fail to enter the Phone Lock code correctly, your Telenor EDGE Card is locked. Contact your network operator for your personal unblocking key (PUK). Enter the unblock key into the Card Blocked dialogue box and enter a new PIN code and confirm it.

3	The Wireless Manager window is displayed.

To close Wireless Manager

1	Click the close button in the upper-right corner of the Wireless Manager window. A confirmation window is displayed.
2	Click Yes. When you close Wireless Manager any existing mobile network connections are terminated.

Navigating in Wireless Manager

This section provides information about the menus and toolbars that are displayed in Wireless Manager. Before Connection:

After Connection:

Menu bar
The Menu bar provides access to all the supported functions in Wireless Manager.

Toolbar
Use the buttons that are displayed on the toolbar to access the main views in Wireless Manager.

Button	Description
Status	Displays the Status view. Use the Status view to display information about your wireless connections and to quickly connect and disconnect from existing network connection profiles. For more information about the Status view, see Wireless Manager – Status view on page 29.
Telephony Settings	Displays the Telephony Settings view. Use the Telephony Settings view to display and configure settings such as, preferred networks, SIM lock code, network selection, and call diverting. For more information about the Telephony Settings view, see Wireless Manager – Telephony Settings view on page 33.
Phone Book	Displays the Phone Book view. Use the Phone Book view to read and update phonebook entries that are saved to your Telenor Data SIM and your hard drive. For more information about the Phone Book view, see Wireless Manager – Phone Book view on page 42.
SMS Messages	Displays the SMS Messages view. Use the SMS Messages window to view and manage your SMS messages. For more information about the SMS Messages window, see Wireless Manager – SMS Messages view on page 47.
Online Services	Displays the Online Services view. Use the Online Services window to access the menu of online services that your mobile operator may have placed on your Telenor Data SIM. For more information about the Online Services window, see Wireless Manager – Online Services view on page 51.

Standard Toolbar
The standard toolbar provides access to the edit, copy, and paste functions in addition to tools that are specific to the current view. The buttons on this toolbar become active when you select or navigate to a view or dialogue box that contains information that you can edit. For example, the Add phone book entry button is active only on the Phone Book view.

This toolbar also provides access to a group of quick launch buttons that you can configure to start other applications that you frequently use.

Wireless Manager Status Icon
The Wireless Manager status icon that is displayed in your desktop system tray allows you to view the current status of your Telenor EDGE Card radio and connection.

Viewing the Telenor EDGE Connection Status
Move your mouse pointer over the Wireless Manager status icon in the Windows system tray. The status of your connection is displayed.

Some of the status icons that display in the system tray have menus associated with them.

Viewing the Telenor EDGE radio status
The appearance of the Wireless Manager status icon indicates the status of the Telenor EDGE radio. The following icons represent the different versions of the Wireless Manager status icon.

Icon	Description
	Wireless Manager is waiting for your Telenor EDGE Card card to be inserted.
	Telenor EDGE radio is set to Off.
	The Telenor EDGE radio is set to On, but there is no GSM or GPRS/EDGE/ service available.
	The PC card has GSM and GPRS/EDGE/ service. GPRS/EDGE/ , CSD, and SMS may be used, provided these are supported by your subscription.
	Your PC card has GSM service and a signal strength of 3 out of 5 bars. CSD and SMS may be used, provided these are supported by the subscription. GPRS/EDGE/ is not available.

Accessing the Wireless Manager menu
Right-click on the Wireless Manager status icon in the Windows system tray to access the Telenor EDGE menu options.

The Telenor EDGE menu is displayed.
Some of these menu options are disabled depending on the current state of your Telenor EDGE Card.

Open Wireless Manager
This menu option starts Wireless Manager. You also can double click the Wireless Manager status icon to start Wireless Manager.

Turn GSM GRPS/EDGE/ Radio On/Off (Radio status)
This menu option is dynamic. It monitors the current state of the Telenor EDGE Card radio transmitter and gives you the option to change it to the opposite state. For example, if your Telenor EDGE radio transmitter is on, the menu option reads Turn GSM GPRS/ EDGE/ Radio Off.

You also can set the status of the Telenor EDGE radio transmitter by selectingTurn Telenor EDGE Radio On/Off from the File menu in Wireless Manager.

Connect/Disconnect
If you are currently disconnected, the menu gives you the option to connect to the most recently used Telenor EDGE connection. If you are connected, the menu gives you the option to disconnect.

Help
Opens the Wireless Manager online help. You also can launch the online help from the Help menu in Wireless Manager. Press F1 in any of the Wireless Manager dialogue boxes to open the relevant help window.

About
Displays a dialogue box that contains information about the version of Wireless Manager that is installed on your computer.

Hide to tray
When you select Hide to tray, the Wireless Manager application continues to run, however, the Wireless Manager window is not displayed. The Wireless Manager status icon remains in the system tray when the application is hidden. Use the Open Wireless Manager option from the menu, or double-click the Wireless Manager status icon to display the Wireless Manager window again.

Exit
Exits the Wireless Manager application completely. Use the stop/remove commands if you want the application to remain in the background. See Removing your PC card on page 9 for more details.

Windows status icons
In addition, the following standard Windows operating system icons also appear in the system tray when your Telenor EDGE Card is inserted in your PC and in use.

Icon	Description
	Active Windows network connection. Position your mouse pointer over the icon or doubleclick it to display information about the network connection. For example, you can position your mouse pointer over this icon to display the number of bytes sent or received. Several of these icons may be displayed, each representing a different connection: dial-up, CSD, GPRS/EDGE/ , and wireless LAN connections.
	Disconnected Windows Local Area Connection. Several of these icons may be displayed, each representing a different connection: GPRS/EDGE/ and wireless LAN connections.
	PC Card icon. This icon indicates that a PC card is present. It displays the properties associated with the PC card. You also can stop the PC card activity and remove it. See Logging on to Windows using a GPRS/EDGE/ dial-up connection on page 22 for details.

The Windows network connection icons, displayed in the system tray, normally disappear after a connection is made. As a result, the network connection icon might not be displayed for your GPRS/EDGE, CSD, and wireless LAN connections.

To display the Windows network connection icon in the system tray

1	From the Windows desktop, select Start --> Settings --> Control Panel --> Network Connections. The Network Connections window displays the network connections configurations that have been set up on your PC.
2	Right-click on the connection that you want to display in the system tray, and select Properties.
3	On the General tab, select the Show icon in notification when connectedcheck box.
4	Click OK to close the dialogue. When the selected network connection is active, the Windows connection icon is displayed in the system tray.